/* composite.c - Handles GS1 Composite Symbols */ /* libzint - the open source barcode library Copyright (C) 2008 - 2021 Robin Stuart Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* vim: set ts=4 sw=4 et : */ /* The functions "getBit", "init928" and "encode928" are copyright BSI and are released with permission under the following terms: "Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the international standardisation bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise - without prior written permission from BSI. "This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained." The date of publication for these functions is 31 May 2006 */ #include #include #include #ifdef _MSC_VER #include #endif #include "common.h" #include "pdf417.h" #include "gs1.h" #include "general_field.h" #define UINT unsigned short #include "composite.h" INTERNAL int gs1_128_cc(struct zint_symbol *symbol, unsigned char source[], int length, const int cc_mode, const int cc_rows); INTERNAL int eanx_cc(struct zint_symbol *symbol, unsigned char source[], int length, const int cc_rows); INTERNAL int ean_leading_zeroes(struct zint_symbol *symbol, const unsigned char source[], unsigned char local_source[], int *p_with_addon); INTERNAL int dbar_omnstk_set_height(struct zint_symbol *symbol, const int first_row); INTERNAL int dbar_omn_cc(struct zint_symbol *symbol, unsigned char source[], int length, const int cc_rows); INTERNAL int dbar_ltd_cc(struct zint_symbol *symbol, unsigned char source[], int length, const int cc_rows); INTERNAL int dbar_exp_cc(struct zint_symbol *symbol, unsigned char source[], int length, const int cc_rows); INTERNAL int dbar_date(const unsigned char source[], const int src_posn); static int _min(const int first, const int second) { if (first <= second) return first; else return second; } /* gets bit in bitString at bitPos */ static int getBit(const UINT *bitStr, const int bitPos) { return !!(bitStr[bitPos >> 4] & (0x8000 >> (bitPos & 15))); } /* converts bit string to base 928 values, codeWords[0] is highest order */ static int encode928(const UINT bitString[], UINT codeWords[], const int bitLng) { int i, j, b, cwNdx, cwLng; for (cwNdx = cwLng = b = 0; b < bitLng; b += 69, cwNdx += 7) { int bitCnt = _min(bitLng - b, 69); int cwCnt; cwLng += cwCnt = bitCnt / 10 + 1; for (i = 0; i < cwCnt; i++) codeWords[cwNdx + i] = 0; /* init 0 */ for (i = 0; i < bitCnt; i++) { if (getBit(bitString, b + bitCnt - i - 1)) { for (j = 0; j < cwCnt; j++) codeWords[cwNdx + j] += pwr928[i][j + 7 - cwCnt]; } } for (i = cwCnt - 1; i > 0; i--) { /* add "carries" */ codeWords[cwNdx + i - 1] += codeWords[cwNdx + i] / 928; codeWords[cwNdx + i] %= 928; } } return (cwLng); } /* CC-A 2D component */ static void cc_a(struct zint_symbol *symbol, const char source[], const int cc_width) { int i, segment, bitlen, cwCnt, variant, rows; int k, offset, j, total, rsCodeWords[8] = {0}; int LeftRAPStart, RightRAPStart, CentreRAPStart, StartCluster; int LeftRAP, RightRAP, CentreRAP, Cluster; int loop; UINT codeWords[28] = {0}; UINT bitStr[13] = {0}; char pattern[580]; int bp = 0; variant = 0; bitlen = (int) strlen(source); for (segment = 0; segment < 13; segment++) { int strpos = segment * 16; if (strpos >= bitlen) { break; } for (i = 0; i < 16 && strpos + i < bitlen; i++) { if (source[strpos + i] == '1') { bitStr[segment] |= (0x8000 >> i); } } } /* encode codeWords from bitStr */ cwCnt = encode928(bitStr, codeWords, bitlen); switch (cc_width) { case 2: switch (cwCnt) { case 6: variant = 0; break; case 8: variant = 1; break; case 9: variant = 2; break; case 11: variant = 3; break; case 12: variant = 4; break; case 14: variant = 5; break; case 17: variant = 6; break; } break; case 3: switch (cwCnt) { case 8: variant = 7; break; case 10: variant = 8; break; case 12: variant = 9; break; case 14: variant = 10; break; case 17: variant = 11; break; } break; case 4: switch (cwCnt) { case 8: variant = 12; break; case 11: variant = 13; break; case 14: variant = 14; break; case 17: variant = 15; break; case 20: variant = 16; break; } break; } rows = ccaVariants[variant]; k = ccaVariants[17 + variant]; offset = ccaVariants[34 + variant]; /* Reed-Solomon error correction */ for (i = 0; i < cwCnt; i++) { total = (codeWords[i] + rsCodeWords[k - 1]) % 929; for (j = k - 1; j >= 0; j--) { if (j == 0) { rsCodeWords[j] = (929 - (total * ccaCoeffs[offset + j]) % 929) % 929; } else { rsCodeWords[j] = (rsCodeWords[j - 1] + 929 - (total * ccaCoeffs[offset + j]) % 929) % 929; } } } for (j = 0; j < k; j++) { if (rsCodeWords[j] != 0) { rsCodeWords[j] = 929 - rsCodeWords[j]; } } for (i = k - 1; i >= 0; i--) { codeWords[cwCnt] = rsCodeWords[i]; cwCnt++; } /* Place data into table */ LeftRAPStart = aRAPTable[variant]; CentreRAPStart = aRAPTable[variant + 17]; RightRAPStart = aRAPTable[variant + 34]; StartCluster = aRAPTable[variant + 51] / 3; LeftRAP = LeftRAPStart; CentreRAP = CentreRAPStart; RightRAP = RightRAPStart; Cluster = StartCluster; /* Cluster can be 0, 1 or 2 for Cluster(0), Cluster(3) and Cluster(6) */ for (i = 0; i < rows; i++) { bp = 0; offset = 929 * Cluster; k = i * cc_width; /* Copy the data into codebarre */ if (cc_width != 3) { bp = bin_append_posn(rap_side[LeftRAP - 1], 10, pattern, bp); } bp = bin_append_posn(pdf_bitpattern[offset + codeWords[k]], 16, pattern, bp); pattern[bp++] = '0'; if (cc_width >= 2) { if (cc_width == 3) { bp = bin_append_posn(rap_centre[CentreRAP - 1], 10, pattern, bp); } bp = bin_append_posn(pdf_bitpattern[offset + codeWords[k + 1]], 16, pattern, bp); pattern[bp++] = '0'; if (cc_width >= 3) { if (cc_width == 4) { bp = bin_append_posn(rap_centre[CentreRAP - 1], 10, pattern, bp); } bp = bin_append_posn(pdf_bitpattern[offset + codeWords[k + 2]], 16, pattern, bp); pattern[bp++] = '0'; if (cc_width == 4) { bp = bin_append_posn(pdf_bitpattern[offset + codeWords[k + 3]], 16, pattern, bp); pattern[bp++] = '0'; } } } bp = bin_append_posn(rap_side[RightRAP - 1], 10, pattern, bp); pattern[bp++] = '1'; /* stop */ /* so now pattern[] holds the string of '1's and '0's. - copy this to the symbol */ for (loop = 0; loop < bp; loop++) { if (pattern[loop] == '1') { set_module(symbol, i, loop); } } symbol->row_height[i] = 2; symbol->rows++; /* Set up RAPs and Cluster for next row */ LeftRAP++; CentreRAP++; RightRAP++; Cluster++; if (LeftRAP == 53) { LeftRAP = 1; } if (CentreRAP == 53) { CentreRAP = 1; } if (RightRAP == 53) { RightRAP = 1; } if (Cluster == 3) { Cluster = 0; } } symbol->width = bp; if (symbol->debug & ZINT_DEBUG_PRINT) { printf("CC-A Columns: %d, Rows: %d, Variant: %d, CodeWords: %d\n", cc_width, symbol->rows, variant, cwCnt); } } /* CC-B 2D component */ static void cc_b(struct zint_symbol *symbol, const char source[], const int cc_width) { int length = (int) strlen(source) / 8; int i; #ifndef _MSC_VER unsigned char data_string[length + 3]; #else unsigned char *data_string = (unsigned char *) _alloca(length + 3); #endif int chainemc[180], mclength; int k, j, p, longueur, mccorrection[50] = {0}, offset; int total; char pattern[580]; int variant, LeftRAPStart, CentreRAPStart, RightRAPStart, StartCluster; int LeftRAP, CentreRAP, RightRAP, Cluster, loop; int columns; int bp = 0; for (i = 0; i < length; i++) { int binloc = i * 8; data_string[i] = 0; for (p = 0; p < 8; p++) { if (source[binloc + p] == '1') { data_string[i] |= (0x80 >> p); } } } mclength = 0; /* "the CC-B component shall have codeword 920 in the first symbol character position" (section 9a) */ chainemc[mclength] = 920; mclength++; byteprocess(chainemc, &mclength, data_string, 0, length, symbol->debug & ZINT_DEBUG_PRINT); /* Now figure out which variant of the symbol to use and load values accordingly */ variant = 0; if (cc_width == 2) { if (mclength <= 8) { variant = 7; } else if (mclength <= 13) { variant = 8; } else if (mclength <= 19) { variant = 9; } else if (mclength <= 24) { variant = 10; } else if (mclength <= 29) { variant = 11; } else if (mclength <= 33) { variant = 12; } else { variant = 13; } } else if (cc_width == 3) { if (mclength <= 6) { variant = 14; } else if (mclength <= 10) { variant = 15; } else if (mclength <= 14) { variant = 16; } else if (mclength <= 18) { variant = 17; } else if (mclength <= 24) { variant = 18; } else if (mclength <= 34) { variant = 19; } else if (mclength <= 46) { variant = 20; } else if (mclength <= 58) { variant = 21; } else if (mclength <= 70) { variant = 22; } else { variant = 23; } } else if (cc_width == 4) { if (mclength <= 8) { variant = 24; } else if (mclength <= 12) { variant = 25; } else if (mclength <= 18) { variant = 26; } else if (mclength <= 24) { variant = 27; } else if (mclength <= 30) { variant = 28; } else if (mclength <= 39) { variant = 29; } else if (mclength <= 54) { variant = 30; } else if (mclength <= 72) { variant = 31; } else if (mclength <= 90) { variant = 32; } else if (mclength <= 108) { variant = 33; } else { variant = 34; } } /* Now we have the variant we can load the data - from here on the same as MicroPDF417 code */ variant--; assert(variant >= 0); columns = MicroVariants[variant]; /* columns */ symbol->rows = MicroVariants[variant + 34]; /* rows */ k = MicroVariants[variant + 68]; /* number of EC CWs */ longueur = (columns * symbol->rows) - k; /* number of non-EC CWs */ i = longueur - mclength; /* amount of padding required */ offset = MicroVariants[variant + 102]; /* coefficient offset */ /* Binary input padded to target length so no padding should be necessary */ while (i > 0) { chainemc[mclength] = 900; /* Not reached */ mclength++; i--; } /* Reed-Solomon error correction */ longueur = mclength; for (i = 0; i < longueur; i++) { total = (chainemc[i] + mccorrection[k - 1]) % 929; for (j = k - 1; j >= 0; j--) { if (j == 0) { mccorrection[j] = (929 - (total * Microcoeffs[offset + j]) % 929) % 929; } else { mccorrection[j] = (mccorrection[j - 1] + 929 - (total * Microcoeffs[offset + j]) % 929) % 929; } } } for (j = 0; j < k; j++) { if (mccorrection[j] != 0) { mccorrection[j] = 929 - mccorrection[j]; } } /* we add these codes to the string */ for (i = k - 1; i >= 0; i--) { chainemc[mclength] = mccorrection[i]; mclength++; } /* Now get the RAP (Row Address Pattern) start values */ LeftRAPStart = RAPTable[variant]; CentreRAPStart = RAPTable[variant + 34]; RightRAPStart = RAPTable[variant + 68]; StartCluster = RAPTable[variant + 102] / 3; /* That's all values loaded, get on with the encoding */ LeftRAP = LeftRAPStart; CentreRAP = CentreRAPStart; RightRAP = RightRAPStart; Cluster = StartCluster; /* Cluster can be 0, 1 or 2 for Cluster(0), Cluster(3) and Cluster(6) */ for (i = 0; i < symbol->rows; i++) { bp = 0; offset = 929 * Cluster; k = i * columns; /* Copy the data into codebarre */ bp = bin_append_posn(rap_side[LeftRAP - 1], 10, pattern, bp); bp = bin_append_posn(pdf_bitpattern[offset + chainemc[k]], 16, pattern, bp); pattern[bp++] = '0'; if (cc_width >= 2) { if (cc_width == 3) { bp = bin_append_posn(rap_centre[CentreRAP - 1], 10, pattern, bp); } bp = bin_append_posn(pdf_bitpattern[offset + chainemc[k + 1]], 16, pattern, bp); pattern[bp++] = '0'; if (cc_width >= 3) { if (cc_width == 4) { bp = bin_append_posn(rap_centre[CentreRAP - 1], 10, pattern, bp); } bp = bin_append_posn(pdf_bitpattern[offset + chainemc[k + 2]], 16, pattern, bp); pattern[bp++] = '0'; if (cc_width == 4) { bp = bin_append_posn(pdf_bitpattern[offset + chainemc[k + 3]], 16, pattern, bp); pattern[bp++] = '0'; } } } bp = bin_append_posn(rap_side[RightRAP - 1], 10, pattern, bp); pattern[bp++] = '1'; /* stop */ /* so now pattern[] holds the string of '1's and '0's. - copy this to the symbol */ for (loop = 0; loop < bp; loop++) { if (pattern[loop] == '1') { set_module(symbol, i, loop); } } symbol->row_height[i] = 2; /* Set up RAPs and Cluster for next row */ LeftRAP++; CentreRAP++; RightRAP++; Cluster++; if (LeftRAP == 53) { LeftRAP = 1; } if (CentreRAP == 53) { CentreRAP = 1; } if (RightRAP == 53) { RightRAP = 1; } if (Cluster == 3) { Cluster = 0; } } symbol->width = bp; if (symbol->debug & ZINT_DEBUG_PRINT) { printf("CC-B Columns: %d, Rows: %d, Variant: %d, CodeWords: %d\n", cc_width, symbol->rows, variant + 1, mclength); } } /* CC-C 2D component - byte compressed PDF417 */ static void cc_c(struct zint_symbol *symbol, const char source[], const int cc_width, const int ecc_level) { int length = (int) strlen(source) / 8; int i, p; #ifndef _MSC_VER unsigned char data_string[length + 4]; #else unsigned char *data_string = (unsigned char *) _alloca(length + 4); #endif int chainemc[1000], mclength, k; int offset, longueur, loop, total, j, mccorrection[520] = {0}; int c1, c2, c3, dummy[35]; char pattern[580]; int bp = 0; for (i = 0; i < length; i++) { int binloc = i * 8; data_string[i] = 0; for (p = 0; p < 8; p++) { if (source[binloc + p] == '1') { data_string[i] |= (0x80 >> p); } } } mclength = 0; chainemc[mclength] = 0; /* space for length descriptor */ mclength++; chainemc[mclength] = 920; /* CC-C identifier */ mclength++; byteprocess(chainemc, &mclength, data_string, 0, length, symbol->debug & ZINT_DEBUG_PRINT); chainemc[0] = mclength; if (symbol->debug & ZINT_DEBUG_PRINT) { printf("CC-C Codewords (%d):", mclength); for (i = 0; i < mclength; i++) printf(" %d", chainemc[i]); printf("\n"); } k = 1; for (i = 1; i <= (ecc_level + 1); i++) { k *= 2; } /* 796 - we now take care of the Reed Solomon codes */ switch (ecc_level) { case 1: offset = 2; /* Not reached */ break; case 2: offset = 6; /* Min ECC currently used is 2 */ break; case 3: offset = 14; break; case 4: offset = 30; break; case 5: offset = 62; /* Max ECC currently used is 5 */ break; case 6: offset = 126; /* Not reached */ break; case 7: offset = 254; /* Not reached */ break; case 8: offset = 510; /* Not reached */ break; default: offset = 0; /* Not reached */ break; } longueur = mclength; for (i = 0; i < longueur; i++) { total = (chainemc[i] + mccorrection[k - 1]) % 929; for (j = k - 1; j >= 0; j--) { if (j == 0) { mccorrection[j] = (929 - (total * coefrs[offset + j]) % 929) % 929; } else { mccorrection[j] = (mccorrection[j - 1] + 929 - (total * coefrs[offset + j]) % 929) % 929; } } } for (j = 0; j < k; j++) { if (mccorrection[j] != 0) { mccorrection[j] = 929 - mccorrection[j]; } } /* we add these codes to the string */ for (i = k - 1; i >= 0; i--) { chainemc[mclength] = mccorrection[i]; mclength++; } /* 818 - The CW string is finished */ symbol->rows = mclength / cc_width; c1 = (symbol->rows - 1) / 3; c2 = ecc_level * 3 + (symbol->rows - 1) % 3; c3 = cc_width - 1; /* we now encode each row */ for (i = 0; i <= symbol->rows - 1; i++) { for (j = 0; j < cc_width; j++) { dummy[j + 1] = chainemc[i * cc_width + j]; } k = (i / 3) * 30; switch (i % 3) { case 0: dummy[0] = k + c1; dummy[cc_width + 1] = k + c3; offset = 0; /* cluster(0) */ break; case 1: dummy[0] = k + c2; dummy[cc_width + 1] = k + c1; offset = 929; /* cluster(3) */ break; case 2: dummy[0] = k + c3; dummy[cc_width + 1] = k + c2; offset = 1858; /* cluster(6) */ break; } bp = 0; bp = bin_append_posn(0x1FEA8, 17, pattern, bp); /* Row start */ for (j = 0; j <= cc_width + 1; j++) { bp = bin_append_posn(pdf_bitpattern[offset + dummy[j]], 16, pattern, bp); pattern[bp++] = '0'; } bp = bin_append_posn(0x3FA29, 18, pattern, bp); /* Row Stop */ for (loop = 0; loop < bp; loop++) { if (pattern[loop] == '1') { set_module(symbol, i, loop); } } symbol->row_height[i] = 3; } symbol->width = bp; if (symbol->debug & ZINT_DEBUG_PRINT) { printf("CC-C Columns: %d, Rows: %d, CodeWords: %d, ECC Level: %d\n", cc_width, symbol->rows, mclength, ecc_level); } } static int calc_padding_cca(const int binary_length, const int cc_width) { int target_bitsize = 0; switch (cc_width) { case 2: if (binary_length <= 59) { target_bitsize = 59; } else if (binary_length <= 78) { target_bitsize = 78; } else if (binary_length <= 88) { target_bitsize = 88; } else if (binary_length <= 108) { target_bitsize = 108; } else if (binary_length <= 118) { target_bitsize = 118; } else if (binary_length <= 138) { target_bitsize = 138; } else if (binary_length <= 167) { target_bitsize = 167; } break; case 3: if (binary_length <= 78) { target_bitsize = 78; } else if (binary_length <= 98) { target_bitsize = 98; } else if (binary_length <= 118) { target_bitsize = 118; } else if (binary_length <= 138) { target_bitsize = 138; } else if (binary_length <= 167) { target_bitsize = 167; } break; case 4: if (binary_length <= 78) { target_bitsize = 78; } else if (binary_length <= 108) { target_bitsize = 108; } else if (binary_length <= 138) { target_bitsize = 138; } else if (binary_length <= 167) { target_bitsize = 167; } else if (binary_length <= 197) { target_bitsize = 197; } break; } return target_bitsize; } static int calc_padding_ccb(const int binary_length, const int cc_width) { int target_bitsize = 0; switch (cc_width) { case 2: if (binary_length <= 56) { target_bitsize = 56; } else if (binary_length <= 104) { target_bitsize = 104; } else if (binary_length <= 160) { target_bitsize = 160; } else if (binary_length <= 208) { target_bitsize = 208; } else if (binary_length <= 256) { target_bitsize = 256; } else if (binary_length <= 296) { target_bitsize = 296; } else if (binary_length <= 336) { target_bitsize = 336; } break; case 3: if (binary_length <= 32) { target_bitsize = 32; } else if (binary_length <= 72) { target_bitsize = 72; } else if (binary_length <= 112) { target_bitsize = 112; } else if (binary_length <= 152) { target_bitsize = 152; } else if (binary_length <= 208) { target_bitsize = 208; } else if (binary_length <= 304) { target_bitsize = 304; } else if (binary_length <= 416) { target_bitsize = 416; } else if (binary_length <= 536) { target_bitsize = 536; } else if (binary_length <= 648) { target_bitsize = 648; } else if (binary_length <= 768) { target_bitsize = 768; } break; case 4: if (binary_length <= 56) { target_bitsize = 56; } else if (binary_length <= 96) { target_bitsize = 96; } else if (binary_length <= 152) { target_bitsize = 152; } else if (binary_length <= 208) { target_bitsize = 208; } else if (binary_length <= 264) { target_bitsize = 264; } else if (binary_length <= 352) { target_bitsize = 352; } else if (binary_length <= 496) { target_bitsize = 496; } else if (binary_length <= 672) { target_bitsize = 672; } else if (binary_length <= 840) { target_bitsize = 840; } else if (binary_length <= 1016) { target_bitsize = 1016; } else if (binary_length <= 1184) { target_bitsize = 1184; } break; } return target_bitsize; } static int calc_padding_ccc(const int binary_length, int *cc_width, const int linear_width, int *ecc) { int target_bitsize = 0; int byte_length, codewords_used, ecc_level, ecc_codewords, rows; int codewords_total, target_codewords, target_bytesize; byte_length = binary_length / 8; if (binary_length % 8 != 0) { byte_length++; } codewords_used = (byte_length / 6) * 5; codewords_used += byte_length % 6; /* Recommended minimum ecc levels ISO/IEC 1543:2015 (PDF417) Annex E Table E.1, restricted by CC-C codeword max 900 (30 cols * 30 rows), GS1 General Specifications 19.1 5.9.2.3 */ if (codewords_used <= 40) { ecc_level = 2; } else if (codewords_used <= 160) { ecc_level = 3; } else if (codewords_used <= 320) { ecc_level = 4; } else if (codewords_used <= 833) { /* 900 - 3 - 64 */ ecc_level = 5; } else if (codewords_used <= 865) { /* 900 - 3 - 32 */ ecc_level = 4; /* Not recommended but allow to meet advertised "up to 2361 digits" (allows max 2372) */ } else { return 0; } *(ecc) = ecc_level; ecc_codewords = 1 << (ecc_level + 1); codewords_used += ecc_codewords; codewords_used += 3; /* -52 = 7 left shift (section 12.3 f) + 10 right quiet zone - 17 start + 2x17 row indicators + 18 stop */ *(cc_width) = (linear_width - 52) / 17; if (*(cc_width) > 30) { *(cc_width) = 30; } rows = (int) ceil((double) codewords_used / *(cc_width)); /* stop the symbol from becoming too high */ while (rows > 30 && *(cc_width) < 30) { *(cc_width) = *(cc_width) + 1; rows = (int) ceil((double) codewords_used / *(cc_width)); } if (rows > 30) { /* Should never happen given `codewords_used` check above (865 / 30 ~ 28.83) */ return 0; /* Not reached */ } if (rows < 3) { rows = 3; } codewords_total = *(cc_width) * rows; target_codewords = codewords_total - ecc_codewords; target_codewords -= 3; target_bytesize = 6 * (target_codewords / 5); target_bytesize += target_codewords % 5; target_bitsize = 8 * target_bytesize; return target_bitsize; } /* Handles all data encodation from section 5 of ISO/IEC 24723 */ static int cc_binary_string(struct zint_symbol *symbol, const unsigned char source[], const int source_len, char binary_string[], const int cc_mode, int *cc_width, int *ecc, const int linear_width) { int encoding_method, read_posn, alpha_pad; int i, j, ai_crop, ai_crop_posn, fnc1_latch; int ai90_mode, remainder; char last_digit = '\0'; int mode; #ifndef _MSC_VER char general_field[source_len + 1]; #else char *general_field = (char *) _alloca(source_len + 1); #endif int target_bitsize; int bp = 0; int debug = symbol->debug & ZINT_DEBUG_PRINT; encoding_method = 1; read_posn = 0; ai_crop = 0; ai_crop_posn = -1; fnc1_latch = 0; alpha_pad = 0; *ecc = 0; target_bitsize = 0; mode = NUMERIC; if ((source[0] == '1') && ((source[1] == '0') || (source[1] == '1') || (source[1] == '7'))) { /* Source starts (10), (11) or (17) */ if (source[1] == '0' || dbar_date(source, 2) >= 0) { /* Check date valid if (11) or (17) */ encoding_method = 2; } } else if ((source[0] == '9') && (source[1] == '0')) { /* Source starts (90) */ encoding_method = 3; } if (encoding_method == 1) { binary_string[bp++] = '0'; if (debug) printf("CC-%c Encodation Method: 0\n", 'A' + (cc_mode - 1)); } else if (encoding_method == 2) { /* Encoding Method field "10" - date and lot number */ bp = bin_append_posn(2, 2, binary_string, bp); /* "10" */ if (source[1] == '0') { /* No date data */ bp = bin_append_posn(3, 2, binary_string, bp); /* "11" */ read_posn = 2; } else { /* Production Date (11) or Expiration Date (17) */ bp = bin_append_posn(dbar_date(source, 2), 16, binary_string, bp); if (source[1] == '1') { /* Production Date AI 11 */ binary_string[bp++] = '0'; } else { /* Expiration Date AI 17 */ binary_string[bp++] = '1'; } read_posn = 8; if ((source[read_posn] == '1') && (source[read_posn + 1] == '0')) { /* Followed by AI 10 - strip this from general field */ read_posn += 2; } else if (source[read_posn]) { /* ISO/IEC 24723:2010 5.3.1 "If a lot number does not directly follow the date element string, a FNC1 is encoded following the date element string ..." */ fnc1_latch = 1; } else { /* "... even if no more data follows the date element string" */ /* So still need FNC1 character but can't do single FNC1 in numeric mode, so insert alphanumeric latch "0000" and alphanumeric FNC1 "01111" (this implementation detail taken from BWIPP https://github.com/bwipp/postscriptbarcode Copyright (c) 2004-2019 Terry Burton) */ bp = bin_append_posn(15, 9, binary_string, bp); /* "000001111" */ /* Note an alphanumeric FNC1 is also a numeric latch, so now in numeric mode */ } } if (debug) { printf("CC-%c Encodation Method: 10, Compaction Field: %.*s\n", 'A' + (cc_mode - 1), read_posn, source); } } else if (encoding_method == 3) { /* Encodation Method field of "11" - AI 90 */ #ifndef _MSC_VER char ninety[source_len + 1]; #else char *ninety = (char *) _alloca(source_len + 1); #endif int ninety_len, alpha, alphanum, numeric, test1, test2, test3; /* "This encodation method may be used if an element string with an AI 90 occurs at the start of the data message, and if the data field following the two-digit AI 90 starts with an alphanumeric string which complies with a specific format." (para 5.3.2) */ memset(ninety, 0, source_len + 1); i = 0; do { ninety[i] = source[i + 2]; i++; } while ((source_len > i + 2) && ('[' != source[i + 2])); ninety[i] = '\0'; ninety_len = i; /* Find out if the AI 90 data is alphabetic or numeric or both */ alpha = 0; alphanum = 0; numeric = 0; for (i = 0; i < ninety_len; i++) { if ((ninety[i] >= 'A') && (ninety[i] <= 'Z')) { /* Character is alphabetic */ alpha += 1; } else if ((ninety[i] >= '0') && (ninety[i] <= '9')) { /* Character is numeric */ numeric += 1; } else { alphanum += 1; } } /* must start with 0, 1, 2 or 3 digits followed by an uppercase character */ test1 = -1; for (i = 3; i >= 0; i--) { if ((ninety[i] >= 'A') && (ninety[i] <= 'Z')) { test1 = i; } } test2 = 0; for (i = 0; i < test1; i++) { if (!((ninety[i] >= '0') && (ninety[i] <= '9'))) { test2 = 1; } } /* leading zeros are not permitted */ test3 = 0; if ((test1 >= 1) && (ninety[0] == '0')) { test3 = 1; } if ((test1 != -1) && (test2 != 1) && (test3 == 0)) { int next_ai_posn; char numeric_part[4]; int numeric_value; int table3_letter; /* Encodation method "11" can be used */ bp = bin_append_posn(3, 2, binary_string, bp); /* "11" */ numeric -= test1; alpha--; /* Decide on numeric, alpha or alphanumeric mode */ /* Alpha mode is a special mode for AI 90 */ if (alphanum == 0 && alpha > numeric) { /* Alpha mode */ bp = bin_append_posn(3, 2, binary_string, bp); /* "11" */ ai90_mode = 2; } else if (alphanum == 0 && alpha == 0) { /* Numeric mode */ bp = bin_append_posn(2, 2, binary_string, bp); /* "10" */ ai90_mode = 3; } else { /* Note if first 4 are digits then it would be shorter to go into NUMERIC mode first; not implemented */ /* Alphanumeric mode */ binary_string[bp++] = '0'; ai90_mode = 1; mode = ALPHANUMERIC; } next_ai_posn = 2 + ninety_len; if (next_ai_posn < source_len && source[next_ai_posn] == '[') { /* There are more AIs afterwards */ if (next_ai_posn + 2 < source_len && (source[next_ai_posn + 1] == '2') && (source[next_ai_posn + 2] == '1')) { /* AI 21 follows */ ai_crop = 1; } else if (next_ai_posn + 4 < source_len && (source[next_ai_posn + 1] == '8') && (source[next_ai_posn + 2] == '0') && (source[next_ai_posn + 3] == '0') && (source[next_ai_posn + 4] == '4')) { /* AI 8004 follows */ ai_crop = 3; } } switch (ai_crop) { case 0: binary_string[bp++] = '0'; break; case 1: bp = bin_append_posn(2, 2, binary_string, bp); /* "10" */ ai_crop_posn = next_ai_posn + 1; break; case 3: bp = bin_append_posn(3, 2, binary_string, bp); /* "11" */ ai_crop_posn = next_ai_posn + 1; break; } if (test1 == 0) { strcpy(numeric_part, "0"); } else { for (i = 0; i < test1; i++) { numeric_part[i] = ninety[i]; } numeric_part[i] = '\0'; } numeric_value = atoi(numeric_part); table3_letter = -1; if (numeric_value < 31) { table3_letter = posn("BDHIJKLNPQRSTVWZ", ninety[test1]); } if (table3_letter != -1) { /* Encoding can be done according to 5.3.2 c) 2) */ /* five bit binary string representing value before letter */ bp = bin_append_posn(numeric_value, 5, binary_string, bp); /* followed by four bit representation of letter from Table 3 */ bp = bin_append_posn(table3_letter, 4, binary_string, bp); } else { /* Encoding is done according to 5.3.2 c) 3) */ bp = bin_append_posn(31, 5, binary_string, bp); /* ten bit representation of number */ bp = bin_append_posn(numeric_value, 10, binary_string, bp); /* five bit representation of ASCII character */ bp = bin_append_posn(ninety[test1] - 65, 5, binary_string, bp); } read_posn = test1 + 3; /* Do Alpha mode encoding of the rest of the AI 90 data field here */ if (ai90_mode == 2) { /* Alpha encodation (section 5.3.3) */ do { if ((source[read_posn] >= 'A') && (source[read_posn] <= 'Z')) { bp = bin_append_posn(source[read_posn] - 65, 5, binary_string, bp); } else if ((source[read_posn] >= '0') && (source[read_posn] <= '9')) { bp = bin_append_posn(source[read_posn] + 4, 6, binary_string, bp); } else if (source[read_posn] == '[') { bp = bin_append_posn(31, 5, binary_string, bp); } read_posn++; } while ((source[read_posn - 1] != '[') && (source[read_posn - 1] != '\0')); alpha_pad = 1; /* This is overwritten if a general field is encoded */ } if (debug) { printf("CC-%c Encodation Method: 11, Compaction Field: %.*s, Binary: %.*s (%d)\n", 'A' + (cc_mode - 1), read_posn, source, bp, binary_string, bp); } } else { /* Use general field encodation instead */ binary_string[bp++] = '0'; read_posn = 0; if (debug) printf("CC-%c Encodation Method: 0\n", 'A' + (cc_mode - 1)); } } /* The compressed data field has been processed if appropriate - the rest of the data (if any) goes into a general-purpose data compaction field */ j = 0; if (fnc1_latch == 1) { /* Encodation method "10" has been used but it is not followed by AI 10, so a FNC1 character needs to be added */ general_field[j] = '['; j++; } for (i = read_posn; i < source_len; i++) { /* Skip "[21" or "[8004" AIs if encodation method "11" used */ if (i == ai_crop_posn) { i += ai_crop; } else { general_field[j] = source[i]; j++; } } general_field[j] = '\0'; if (debug) { printf("Mode %s, General Field: %.40s%s\n", mode == NUMERIC ? "NUMERIC" : mode == ALPHANUMERIC ? "ALPHANUMERIC" : "ISO646", general_field, j > 40 ? "..." : ""); } if (j != 0) { /* If general field not empty */ alpha_pad = 0; if (!general_field_encode(general_field, j, &mode, &last_digit, binary_string, &bp)) { /* Invalid character in input data */ strcpy(symbol->errtxt, "441: Invalid character in input data"); return ZINT_ERROR_INVALID_DATA; } } switch (cc_mode) { case 1: target_bitsize = calc_padding_cca(bp, *(cc_width)); break; case 2: target_bitsize = calc_padding_ccb(bp, *(cc_width)); break; case 3: target_bitsize = calc_padding_ccc(bp, cc_width, linear_width, ecc); break; } if (target_bitsize == 0) { strcpy(symbol->errtxt, "442: Input too long for selected 2D component"); return ZINT_ERROR_TOO_LONG; } remainder = target_bitsize - bp; if (last_digit) { /* There is still one more numeric digit to encode */ if ((remainder >= 4) && (remainder <= 6)) { /* ISO/IEC 24723:2010 5.4.1 c) 2) "If four to six bits remain, add 1 to the digit value and encode the result in the next four bits. ..." */ bp = bin_append_posn(ctoi(last_digit) + 1, 4, binary_string, bp); if (remainder > 4) { /* "... The fifth and sixth bits, if present, shall be “0”s." (Covered by adding truncated alphanumeric latch below but do explicitly anyway) */ bp = bin_append_posn(0, remainder - 4, binary_string, bp); } } else { bp = bin_append_posn((11 * ctoi(last_digit)) + 18, 7, binary_string, bp); /* This may push the symbol up to the next size */ } } switch (cc_mode) { case 1: target_bitsize = calc_padding_cca(bp, *(cc_width)); break; case 2: target_bitsize = calc_padding_ccb(bp, *(cc_width)); break; case 3: target_bitsize = calc_padding_ccc(bp, cc_width, linear_width, ecc); break; } if (target_bitsize == 0) { strcpy(symbol->errtxt, "444: Input too long for selected 2D component"); return ZINT_ERROR_TOO_LONG; } if (bp < target_bitsize) { /* Now add padding to binary string */ if (alpha_pad == 1) { bp = bin_append_posn(31, 5, binary_string, bp); /* "11111" */ /* Extra FNC1 character required after Alpha encodation (section 5.3.3) */ } if (mode == NUMERIC) { bp = bin_append_posn(0, 4, binary_string, bp); /* "0000" */ } while (bp < target_bitsize) { bp = bin_append_posn(4, 5, binary_string, bp); /* "00100" */ } } binary_string[target_bitsize] = '\0'; if (debug) { printf("ECC: %d, CC width %d\n", *ecc, *cc_width); printf("Binary: %s (%d)\n", binary_string, target_bitsize); } return 0; } static int linear_dummy_run(int input_mode, unsigned char *source, const int length, char *errtxt) { struct zint_symbol *dummy; int error_number; int linear_width; dummy = ZBarcode_Create(); dummy->symbology = BARCODE_GS1_128_CC; dummy->input_mode = input_mode; error_number = gs1_128_cc(dummy, source, length, 3 /*cc_mode*/, 0 /*cc_rows*/); linear_width = dummy->width; if (error_number >= ZINT_ERROR) { strcpy(errtxt, dummy->errtxt); } ZBarcode_Delete(dummy); if (error_number >= ZINT_ERROR) { return 0; } return linear_width; } static const char in_linear_comp[] = " in linear component"; INTERNAL int composite(struct zint_symbol *symbol, unsigned char source[], int length) { int error_number, warn_number = 0, cc_mode, cc_width = 0, ecc_level = 0; int j, i, k; /* Allow for 8 bits + 5-bit latch per char + 1000 bits overhead/padding */ unsigned int bs = 13 * length + 1000 + 1; #ifndef _MSC_VER char binary_string[bs]; #else char *binary_string = (char *) _alloca(bs); #endif unsigned int pri_len; struct zint_symbol *linear; int top_shift, bottom_shift; int linear_width = 0; if (symbol->debug & ZINT_DEBUG_PRINT) printf("Reduced length: %d\n", length); /* Perform sanity checks on input options first */ error_number = 0; pri_len = (int) strlen(symbol->primary); if (pri_len == 0) { strcpy(symbol->errtxt, "445: No primary (linear) message in 2D composite"); return ZINT_ERROR_INVALID_OPTION; } if (length > 2990) { strcpy(symbol->errtxt, "446: 2D component input data too long"); return ZINT_ERROR_TOO_LONG; } cc_mode = symbol->option_1; if ((cc_mode == 3) && (symbol->symbology != BARCODE_GS1_128_CC)) { /* CC-C can only be used with a GS1-128 linear part */ strcpy(symbol->errtxt, "447: Invalid mode (CC-C only valid with GS1-128 linear component)"); return ZINT_ERROR_INVALID_OPTION; } if (symbol->symbology == BARCODE_GS1_128_CC) { /* Do a test run of encoding the linear component to establish its width */ linear_width = linear_dummy_run(symbol->input_mode, (unsigned char *) symbol->primary, pri_len, symbol->errtxt); if (linear_width == 0) { if (strlen(symbol->errtxt) + strlen(in_linear_comp) < sizeof(symbol->errtxt)) { strcat(symbol->errtxt, in_linear_comp); } return ZINT_ERROR_INVALID_DATA; } if (symbol->debug & ZINT_DEBUG_PRINT) { printf("GS1-128 linear width: %d\n", linear_width); } } switch (symbol->symbology) { /* Determine width of 2D component according to ISO/IEC 24723 Table 1 */ case BARCODE_EANX_CC: if (pri_len < 20) { int padded_pri_len; int with_addon; unsigned char padded_pri[21]; padded_pri[0] = '\0'; if (!ean_leading_zeroes(symbol, (unsigned char *) symbol->primary, padded_pri, &with_addon)) { sprintf(symbol->errtxt, "448: Input too long (%s) in linear component", with_addon ? "5 character maximum for add-on" : "13 character maximum"); return ZINT_ERROR_TOO_LONG; } padded_pri_len = (int) ustrlen(padded_pri); if (padded_pri_len <= 7) { /* EAN-8 */ cc_width = 3; } else { switch (padded_pri_len) { case 10: /* EAN-8 + 2 */ cc_width = 3; break; case 13: /* EAN-13 CHK or EAN-8 + 5 */ cc_width = with_addon ? 3 : 4; break; case 12: /* EAN-13 */ case 15: /* EAN-13 + 2 */ case 16: /* EAN-13 CHK + 2 */ case 18: /* EAN-13 + 5 */ case 19: /* EAN-13 CHK + 5 */ cc_width = 4; break; } } } if (cc_width == 0) { strcpy(symbol->errtxt, "449: Input wrong length in linear component"); return ZINT_ERROR_TOO_LONG; } break; case BARCODE_GS1_128_CC: cc_width = 4; break; case BARCODE_DBAR_OMN_CC: cc_width = 4; break; case BARCODE_DBAR_LTD_CC: cc_width = 3; break; case BARCODE_DBAR_EXP_CC: cc_width = 4; break; case BARCODE_UPCA_CC: cc_width = 4; break; case BARCODE_UPCE_CC: cc_width = 2; break; case BARCODE_DBAR_STK_CC: cc_width = 2; break; case BARCODE_DBAR_OMNSTK_CC: cc_width = 2; break; case BARCODE_DBAR_EXPSTK_CC: cc_width = 4; break; } if (cc_mode < 1 || cc_mode > 3) { cc_mode = 1; } if (cc_mode == 1) { i = cc_binary_string(symbol, source, length, binary_string, cc_mode, &cc_width, &ecc_level, linear_width); if (i == ZINT_ERROR_TOO_LONG) { symbol->errtxt[0] = '\0'; /* Unset error text */ cc_mode = 2; } else if (i != 0) { return i; } } if (cc_mode == 2) { /* If the data didn't fit into CC-A it is recalculated for CC-B */ i = cc_binary_string(symbol, source, length, binary_string, cc_mode, &cc_width, &ecc_level, linear_width); if (i == ZINT_ERROR_TOO_LONG) { if (symbol->symbology != BARCODE_GS1_128_CC) { return ZINT_ERROR_TOO_LONG; } symbol->errtxt[0] = '\0'; /* Unset error text */ cc_mode = 3; } else if (i != 0) { return i; } } if (cc_mode == 3) { /* If the data didn't fit in CC-B (and linear part is GS1-128) it is recalculated for CC-C */ i = cc_binary_string(symbol, source, length, binary_string, cc_mode, &cc_width, &ecc_level, linear_width); if (i != 0) { return i; } } switch (cc_mode) { /* Note that ecc_level is only relevant to CC-C */ case 1: cc_a(symbol, binary_string, cc_width); break; case 2: cc_b(symbol, binary_string, cc_width); break; case 3: cc_c(symbol, binary_string, cc_width, ecc_level); break; } /* 2D component done, now calculate linear component */ linear = ZBarcode_Create(); /* Symbol contains the 2D component and Linear contains the rest */ linear->symbology = symbol->symbology; linear->input_mode = symbol->input_mode; linear->output_options = symbol->output_options; linear->option_2 = symbol->option_2; /* If symbol->height given minimum row height will be returned, else default height */ linear->height = symbol->height; linear->debug = symbol->debug; if (linear->symbology != BARCODE_GS1_128_CC) { /* Set the "component linkage" flag in the linear component */ linear->option_1 = 2; } switch (symbol->symbology) { case BARCODE_EANX_CC: error_number = eanx_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; case BARCODE_GS1_128_CC: /* GS1-128 needs to know which type of 2D component is used */ error_number = gs1_128_cc(linear, (unsigned char *) symbol->primary, pri_len, cc_mode, symbol->rows); break; case BARCODE_DBAR_OMN_CC: error_number = dbar_omn_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; case BARCODE_DBAR_LTD_CC: error_number = dbar_ltd_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; case BARCODE_DBAR_EXP_CC: error_number = dbar_exp_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; case BARCODE_UPCA_CC: error_number = eanx_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; case BARCODE_UPCE_CC: error_number = eanx_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; case BARCODE_DBAR_STK_CC: error_number = dbar_omn_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; case BARCODE_DBAR_OMNSTK_CC: error_number = dbar_omn_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; case BARCODE_DBAR_EXPSTK_CC: error_number = dbar_exp_cc(linear, (unsigned char *) symbol->primary, pri_len, symbol->rows); break; } if (error_number) { strcpy(symbol->errtxt, linear->errtxt); if (strlen(symbol->errtxt) + strlen(in_linear_comp) < sizeof(symbol->errtxt)) { strcat(symbol->errtxt, in_linear_comp); } if (error_number >= ZINT_ERROR) { ZBarcode_Delete(linear); return error_number; } } /* Merge the linear component with the 2D component */ top_shift = 0; bottom_shift = 0; switch (symbol->symbology) { /* Determine horizontal alignment (according to section 12.3) */ case BARCODE_EANX_CC: switch (ustrlen(linear->text)) { /* Use zero-padded length */ case 8: /* EAN-8 */ case 11: /* EAN-8 + 2 */ case 14: /* EAN-8 + 5 */ if (cc_mode == 1) { bottom_shift = 3; } else { bottom_shift = 13; } break; case 13: /* EAN-13 */ case 16: /* EAN-13 + 2 */ case 19: /* EAN-13 + 5 */ bottom_shift = 2; break; } break; case BARCODE_GS1_128_CC: if (cc_mode == 3) { bottom_shift = 7; /* ISO/IEC 24723:2010 12.3 f) */ } else { /* ISO/IEC 24723:2010 12.3 g) "GS1-128 components linked to the right quiet zone of the CC-A or CC-B: the CC-A or CC-B component is aligned with the last space module of one of the rightmost symbol characters of the linear component. To calculate the target Code 128 symbol character position for alignment, number the positions from right to left (0 is the Stop character, 1 is the Check character, etc.), and then Position = (total number of Code 128 symbol characters – 9) div 2" */ int num_symbols = (linear_width - 2) / 11; int position = (num_symbols - 9) / 2; /* Less 1 to align with last space module */ int calc_shift = linear->width - position * 11 - 1 - symbol->width; if (position) { calc_shift -= 2; /* Less additional stop modules */ } if (calc_shift > 0) { top_shift = calc_shift; } else if (calc_shift < 0) { bottom_shift = -calc_shift; } } break; case BARCODE_DBAR_OMN_CC: bottom_shift = 4; break; case BARCODE_DBAR_LTD_CC: if (cc_mode == 1) { top_shift = 1; } else { bottom_shift = 9; } break; case BARCODE_DBAR_EXP_CC: k = 1; while ((!(module_is_set(linear, 1, k - 1))) && module_is_set(linear, 1, k)) { k++; } top_shift = k; break; case BARCODE_UPCA_CC: bottom_shift = 2; break; case BARCODE_UPCE_CC: bottom_shift = 2; break; case BARCODE_DBAR_STK_CC: top_shift = 1; break; case BARCODE_DBAR_OMNSTK_CC: top_shift = 1; break; case BARCODE_DBAR_EXPSTK_CC: k = 1; while ((!(module_is_set(linear, 1, k - 1))) && module_is_set(linear, 1, k)) { k++; } top_shift = k; break; } if (symbol->debug & ZINT_DEBUG_PRINT) { printf("Top shift: %d, Bottom shift: %d\n", top_shift, bottom_shift); } if (top_shift != 0) { /* Move the 2D component of the symbol horizontally */ for (i = 0; i <= symbol->rows; i++) { for (j = (symbol->width + top_shift); j >= top_shift; j--) { if (module_is_set(symbol, i, j - top_shift)) { set_module(symbol, i, j); } else { unset_module(symbol, i, j); } } for (j = 0; j < top_shift; j++) { unset_module(symbol, i, j); } } } /* Merge linear and 2D components into one structure */ for (i = 0; i <= linear->rows; i++) { symbol->row_height[symbol->rows + i] = linear->row_height[i]; for (j = 0; j <= linear->width; j++) { if (module_is_set(linear, i, j)) { set_module(symbol, i + symbol->rows, j + bottom_shift); } else { unset_module(symbol, i + symbol->rows, j + bottom_shift); } } } if ((linear->width + bottom_shift) > symbol->width + top_shift) { symbol->width = linear->width + bottom_shift; } else if ((symbol->width + top_shift) > linear->width + bottom_shift) { symbol->width += top_shift; } symbol->rows += linear->rows; if (symbol->output_options & COMPLIANT_HEIGHT) { if (symbol->symbology == BARCODE_DBAR_STK_CC) { /* Databar Stacked needs special treatment due to asymmetric rows */ warn_number = dbar_omnstk_set_height(symbol, symbol->rows - linear->rows + 1 /*first_row*/); } else { /* If symbol->height given then min row height was returned, else default height */ warn_number = set_height(symbol, symbol->height ? linear->height : 0.0f, symbol->height ? 0.0f : linear->height, 0.0f, 0 /*no_errtxt*/); } } else { if (symbol->symbology == BARCODE_DBAR_STK_CC) { (void) dbar_omnstk_set_height(symbol, symbol->rows - linear->rows + 1 /*first_row*/); } else { (void) set_height(symbol, symbol->height ? linear->height : 0.0f, symbol->height ? 0.0f : linear->height, 0.0f, 1 /*no_errtxt*/); } } ustrcpy(symbol->text, linear->text); ZBarcode_Delete(linear); return error_number ? error_number : warn_number; }