EMF/PCX/PNG/TIF only, i.e. excluding EPS, GIF & SVG)
- Add support for specifying scale by X-dimension and resolution
with new option `--scalexdimdp` for CLI/Tcl & new API function
`ZBarcode_Scale_From_XdimDp()` (+ `ZBarcode_XdimDp_From_Scale()`
& `ZBarcode_Default_Xdim()`) and new GUI popup; manual: document
- BMP/EMF/PCX/PNG/TIF: use new `dpmm` resolution field (for EMF
following Inkscape)
- backend_qt: add `dpmm()`, `vectorWidth()`, `vectorHeight()`,
`noPng()`, `getVersion()`, `takesGS1AIData()`, & `XdimDp` stuff
incl. new `QZintXdimDp` struct for passing around scale vars &
use in `getAsCLI()`; add comments
- Raise `scale` limit to 200 (from 100) to allow for large dpmm
- output: create directories & subdirectories as necessary for
output path using new function `out_fopen()` and use in BMP/EMF/
EPS/GIF/PCX/PNG/SVG/TIF
- DPLEIT/DPIDENT: format HRT according to (incomplete)
documentation, and set default height to 72X (from 50X)
- CODE128B renamed to CODE128AB as can use subsets A and/or B
- CODABAR: fix minimum height calc
- EMF: fix indexing of handles (zero-based not 1-based)
- GUI: fix symbology zap (previous technique of clearing and
re-loading settings without doing a sync no longer works);
fix UPCEAN guard descent enable
- MAILMARK: better error message if input < 14 characters
- GUI: add "Default" button for DAFT tracker ratio & enable/disable
various default buttons; use new `takesGS1AIData()` to
enable/disable GS1-specific checkboxes
- CLI: use new `validate_float()` to parse float options (7
significant digits allowed only, no scientific notation)
- DATAMATRIX/GRIDMATRIX/PDF417/QR/ULTRA: micro-optimize structapp
ID parse
- library/CLI: fiddle with static asserts (make CHAR_BIT sensitive,
supposedly)
- win32/README: update building libpng (assembly removed)
- README.linux: document incompatibility of Qt6 >= 6.3
- manual: expand Barcode Studio waffle
- test suite: change range separator to hyphen and allow multiple
excludes
project builds (will add back in future if go fully CMake)
- NO_PNG -> ZINT_NO_PNG and new API function `Zint_NoPng()` to
determine if no PNG support in libzint; replace use in GUI with
backend_qt method `noPng()`
`-bindtop`/"Bind Top"
- DPD: add top boundary (width 3X) by default, using new
BARCODE_BIND_TOP; "relabel" option; some compliance checks
- GUI: only skip encoded/errored signal processing if active modal
ExportDialog (wasn't clearing/setting error text bar correctly
for DataDialog)
- CODE128: debug print checksum
- CODE49/DATAMATRIX/QR/ULTRA: fix uniqueness of errtxt nos
- manual: fuller DPD doc; some spelling typos, formatting
spanning Text segments to avoid affecting 1st char of 2nd segment
- PDF417/MICROPDF417: add optimized encoding, FAST_MODE for
previous scheme; formatting changes
- common.c/h: add `cnt_digits()`, comments in include and make more
consistent, minor code fiddling
- DOTCODE: replace `dc_n_digits()` with new `cnt_digits()`
- test_qr: fix `test_qr_perf()`
- composite: minor code fiddling
- library: debug dump HIBC-processed input
- BWIPP: update to latest
intermediate CodeC sequence by setting `f_state` only if in
CodeA/B & checking before adding extended mode switch (cf
OkapiBarcode commit [9ce6dcc], props Daniel Gredler)
DATAMATRIX: in FAST_MODE re-process any buffered X12 characters
when mode changes from X12 (cf OkapiBarcode commit [fb7981e],
props Daniel Gredler)
CODABLOCKF: allow for FNC4 when estimating no. of rows required
CODE16K: make sure row calculation accurate by dispensing with
glyph estimate & using actual codeword count
CODE16K: ensure initial mode selection allows for extended
characters
vector.c: add `z_alloca()` cast for `first_row_rects` (ticket
#272)
MSVC project files: remove incorrect "CompileACpp" setting from
libzint project files (ticket #272)
bwipp_dump.ps: fix 2/4-track processing; update to latest BWIPP
manual/man page/GUI: Code 16k -> Code 16K
GS1 mode, ticket #271
- CLI: improve `getopt_long_only()` processing, printing own message if bad
arg and returning error if so rather than continuing to process
- manual: MSE typo -> MSI, a few other changes; adjust SVG scaling for PDF
manual; pandoc 2.19.2
- make Sequence Format textbox bigger (on own line)
- suppress question mark in Windows dialogs
AUSPOST: more standard error messages
backend: add & use z_isdigit/upper/lower() macros
docs: 20-bit Unicode -> 21-bit Unicode
QRCODE: use stricter interpretation of ZINT_FULL_MULTIBYTE, excluding
certain trailing bytes
libzint: fix some confusing error messages introduced by segment stuff
general: new escape chars \U, \d and \o
backend_qt: fudge rendering of border rectangles due to scaling/translation
rounding errors TODO: better fudge
GUI: foreground/background colours -> text boxes and icon buttons, add swap
button, independently movable picker (NULL parent), preview colour changes,
preview Data Window changes, add clear data (del) buttons, add zap button
and Factory Reset menu option, various other fixes
libzint: remove STATIC_UNLESS_ZINT_TEST, use wrappers
CMake: add find package QtSvg, remove QtXml
manual: split symbology and general specs and sort, move DAFT to 4-state,
UPC/EAN -> EAN/UPC, DataBar -> GS1 DataBar always, expand MAILMARK info,
various other fiddlings
man page: options or -> |, expand MSI Plessey check digit options
README.linux: add packages info
license: add SPDX-License-Identifier to touched files
as to fully comply with BSD license (for why Library GPL 2+ not
compatible see https://opensource.stackexchange.com/a/6701),
~3% slower (maybe), +~6K extra in data
(gb18030.c, gb2313.c & sjis.c removed, mapping .TXT files moved
to backend/tools/data & extra ones added, 2 new PHP generators)
GUI: CODE39/EXCODE39: show/hide HIBC check digit option in addition
to enable/disable (less confusing)
CLI: batch: pedantic check for EOF using intChar in newline fgetc()
loop
test_args.c: don't use WIFEXITED(), WEXITSTATUS() on Windows
manual: lessen some copy/paste verbiage by referring back, other
small tweaks/typos
ZINT_WARN_INVALID_OPTION instead of 0 on ignored option;
more barcode synonyms
manual: append man page zint.1.pmd instead of CLI help;
various tweaks and fiddlings;
rMQR add ISO 23941 (released the other day but haven't got yet)
man page: expand and tweak
doc/Makefile: add HTML demo
HANXIN/QRCODE: use Hanzi/Kanji modes when compatible ECIs given
manual: one true source now manual.pmd from which manual.txt is generated
CLI: man page moved from frontend/zint.1.gz to docs/zint.1.gz, now
generated from docs/zint.1.pmd
add README.linux to root dir
