zint-barcode-generator/backend/code49.c

393 lines
15 KiB
C
Raw Normal View History

2009-05-10 07:47:20 -04:00
/* code49.c - Handles Code 49 */
/*
libzint - the open source barcode library
Copyright (C) 2009-2024 Robin Stuart <rstuart114@gmail.com>
2009-05-10 07:47:20 -04:00
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
2009-05-10 07:47:20 -04:00
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
2009-05-10 07:47:20 -04:00
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
*/
/* SPDX-License-Identifier: BSD-3-Clause */
2009-05-10 07:47:20 -04:00
#include <stdio.h>
#include "common.h"
#include "code49.h"
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
static const char C49_INSET[] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ-. $/+%!&*";
2009-07-09 04:28:00 -04:00
/* "!" represents Shift 1 and "&" represents Shift 2, "*" represents FNC1 */
2009-05-10 07:47:20 -04:00
INTERNAL int code49(struct zint_symbol *symbol, unsigned char source[], int length) {
int i, j, rows, M, x_count, y_count, z_count, posn_val, local_value;
char intermediate[170] = "";
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
char *d = intermediate;
int codewords[170], codeword_count;
int c_grid[8][8]; /* Refers to table 3 */
int w_grid[8][4]; /* Refets to table 2 */
int pad_count = 0;
char pattern[80];
int bp = 0; /* Initialize to suppress gcc -Wmaybe-uninitialized warning */
int gs1;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
int h;
int error_number = 0;
if (length > 81) {
strcpy(symbol->errtxt, "430: Input too long (81 character maximum)");
return ZINT_ERROR_TOO_LONG;
}
if ((symbol->input_mode & 0x07) == GS1_MODE) {
gs1 = 1;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
*d++ = '*'; /* FNC1 */
} else {
gs1 = 0;
}
for (i = 0; i < length; i++) {
if (source[i] > 127) {
strcpy(symbol->errtxt, "431: Invalid character in input data, extended ASCII not allowed");
return ZINT_ERROR_INVALID_DATA;
}
if (gs1 && source[i] == '\x1D') {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
*d++ = '*'; /* FNC1 */
} else {
const char *const entry = c49_table7[source[i]];
memcpy(d, entry, 2);
d += entry[1] ? 2 : 1;
}
}
codeword_count = 0;
i = 0;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
h = d - intermediate;
do {
if (z_isdigit(intermediate[i])) {
/* Numeric data */
for (j = 0; z_isdigit(intermediate[i + j]); j++);
if (j >= 5) {
/* Use Numeric Encodation Method */
int block_count, c;
int block_remain;
int block_value;
codewords[codeword_count] = 48; /* Numeric Shift */
codeword_count++;
block_count = j / 5;
block_remain = j % 5;
for (c = 0; c < block_count; c++) {
if ((c == block_count - 1) && (block_remain == 2)) {
/* Rule (d) */
block_value = 100000;
block_value += ctoi(intermediate[i]) * 1000;
block_value += ctoi(intermediate[i + 1]) * 100;
block_value += ctoi(intermediate[i + 2]) * 10;
block_value += ctoi(intermediate[i + 3]);
codewords[codeword_count] = block_value / (48 * 48);
block_value = block_value - (48 * 48) * codewords[codeword_count];
codeword_count++;
codewords[codeword_count] = block_value / 48;
block_value = block_value - 48 * codewords[codeword_count];
codeword_count++;
codewords[codeword_count] = block_value;
codeword_count++;
i += 4;
block_value = ctoi(intermediate[i]) * 100;
block_value += ctoi(intermediate[i + 1]) * 10;
block_value += ctoi(intermediate[i + 2]);
codewords[codeword_count] = block_value / 48;
block_value = block_value - 48 * codewords[codeword_count];
codeword_count++;
codewords[codeword_count] = block_value;
codeword_count++;
i += 3;
} else {
block_value = ctoi(intermediate[i]) * 10000;
block_value += ctoi(intermediate[i + 1]) * 1000;
block_value += ctoi(intermediate[i + 2]) * 100;
block_value += ctoi(intermediate[i + 3]) * 10;
block_value += ctoi(intermediate[i + 4]);
codewords[codeword_count] = block_value / (48 * 48);
block_value = block_value - (48 * 48) * codewords[codeword_count];
codeword_count++;
codewords[codeword_count] = block_value / 48;
block_value = block_value - 48 * codewords[codeword_count];
codeword_count++;
codewords[codeword_count] = block_value;
codeword_count++;
i += 5;
}
}
switch (block_remain) {
case 1:
/* Rule (a) */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
codewords[codeword_count] = posn(C49_INSET, intermediate[i]);
codeword_count++;
i++;
break;
case 3:
/* Rule (b) */
block_value = ctoi(intermediate[i]) * 100;
block_value += ctoi(intermediate[i + 1]) * 10;
block_value += ctoi(intermediate[i + 2]);
codewords[codeword_count] = block_value / 48;
block_value = block_value - 48 * codewords[codeword_count];
codeword_count++;
codewords[codeword_count] = block_value;
codeword_count++;
i += 3;
break;
case 4:
/* Rule (c) */
block_value = 100000;
block_value += ctoi(intermediate[i]) * 1000;
block_value += ctoi(intermediate[i + 1]) * 100;
block_value += ctoi(intermediate[i + 2]) * 10;
block_value += ctoi(intermediate[i + 3]);
codewords[codeword_count] = block_value / (48 * 48);
block_value = block_value - (48 * 48) * codewords[codeword_count];
codeword_count++;
codewords[codeword_count] = block_value / 48;
block_value = block_value - 48 * codewords[codeword_count];
codeword_count++;
codewords[codeword_count] = block_value;
codeword_count++;
i += 4;
break;
}
if (i < h) {
/* There is more to add */
codewords[codeword_count] = 48; /* Numeric Shift */
codeword_count++;
}
} else {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
codewords[codeword_count] = posn(C49_INSET, intermediate[i]);
codeword_count++;
i++;
}
} else {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
codewords[codeword_count] = posn(C49_INSET, intermediate[i]);
codeword_count++;
i++;
}
} while (i < h);
switch (codewords[0]) {
/* Set starting mode value */
case 48: M = 2;
break;
case 43: M = 4;
break;
case 44: M = 5;
break;
default: M = 0;
break;
}
if (M != 0) {
2016-05-22 16:52:29 -04:00
codeword_count--;
for (i = 0; i < codeword_count; i++) {
codewords[i] = codewords[i + 1];
}
}
if (codeword_count > 49) {
strcpy(symbol->errtxt, "432: Input too long (49 symbol character maximum)");
return ZINT_ERROR_TOO_LONG;
}
/* Place codewords in code character array (c grid) */
rows = 0;
do {
for (i = 0; i < 7; i++) {
if (((rows * 7) + i) < codeword_count) {
c_grid[rows][i] = codewords[(rows * 7) + i];
} else {
c_grid[rows][i] = 48; /* Pad */
pad_count++;
}
}
rows++;
} while ((rows * 7) < codeword_count);
if ((((rows <= 6) && (pad_count < 5))) || (rows > 6) || (rows == 1)) {
/* Add a row */
for (i = 0; i < 7; i++) {
c_grid[rows][i] = 48; /* Pad */
}
rows++;
}
if (symbol->option_1 >= 2 && symbol->option_1 <= 8) { /* Minimum no. of rows */
if (symbol->option_1 > rows) {
for (j = symbol->option_1 - rows; j > 0; j--) {
for (i = 0; i < 7; i++) {
c_grid[rows][i] = 48; /* Pad */
}
rows++;
}
}
} else if (symbol->option_1 >= 1) {
strcpy(symbol->errtxt, "433: Minimum number of rows out of range (2 to 8)");
return ZINT_ERROR_INVALID_OPTION;
}
/* Add row count and mode character */
c_grid[rows - 1][6] = (7 * (rows - 2)) + M;
/* Add row check character */
for (i = 0; i < rows - 1; i++) {
int row_sum = 0;
for (j = 0; j < 7; j++) {
row_sum += c_grid[i][j];
}
c_grid[i][7] = row_sum % 49;
}
/* Calculate Symbol Check Characters */
posn_val = 0;
x_count = c_grid[rows - 1][6] * 20;
y_count = c_grid[rows - 1][6] * 16;
z_count = c_grid[rows - 1][6] * 38;
for (i = 0; i < rows - 1; i++) {
for (j = 0; j < 4; j++) {
local_value = (c_grid[i][2 * j] * 49) + c_grid[i][(2 * j) + 1];
x_count += c49_x_weight[posn_val] * local_value;
y_count += c49_y_weight[posn_val] * local_value;
z_count += c49_z_weight[posn_val] * local_value;
posn_val++;
}
}
if (rows > 6) {
/* Add Z Symbol Check */
c_grid[rows - 1][0] = (z_count % 2401) / 49;
c_grid[rows - 1][1] = (z_count % 2401) % 49;
}
local_value = (c_grid[rows - 1][0] * 49) + c_grid[rows - 1][1];
x_count += c49_x_weight[posn_val] * local_value;
y_count += c49_y_weight[posn_val] * local_value;
posn_val++;
/* Add Y Symbol Check */
c_grid[rows - 1][2] = (y_count % 2401) / 49;
c_grid[rows - 1][3] = (y_count % 2401) % 49;
local_value = (c_grid[rows - 1][2] * 49) + c_grid[rows - 1][3];
x_count += c49_x_weight[posn_val] * local_value;
/* Add X Symbol Check */
c_grid[rows - 1][4] = (x_count % 2401) / 49;
c_grid[rows - 1][5] = (x_count % 2401) % 49;
/* Add last row check character */
j = 0;
for (i = 0; i < 7; i++) {
j += c_grid[rows - 1][i];
}
c_grid[rows - 1][7] = j % 49;
if (symbol->debug & ZINT_DEBUG_PRINT) {
EAN/UPC: add quiet zone indicators option (API `output_options` `EANUPC_GUARD_WHITESPACE`, CLI `--guardwhitespace`) (ticket #287) EAN-2/EAN-5: HRT now at top instead of at bottom for standalones, following BWIPP CLI: batch mode: don't close input if stdin EAN/UPC: fix excess 1X to right of add-ons Composites: fix excess whitespace; fix quiet zone calcs to allow for linear shifting CLI: use own (Wine) version of `CommandLineToArgvW()` to avoid loading "shell32.dll" Move "font.h" -> "raster_font.h" EPS/SVG: use new `out_putsf()` func to output floats, avoiding trailing zeroes & locale dependency EPS: simplify "TR" formula SVG: change font from "Helvetica, sans serif" to "OCR-B, monospace"; use single "<path>" instead of multiple "<rect>"s to draw boxes (reduces file size) Add `EMBED_VECTOR_FONT` to `output_options` (CLI `--embedfont`) to enable embedding of font in vector output - currently only for SVG output of EAN/UPC GUI: use "OCR-B" font for EAN/UPC and "Arimo" for all others (was "Helvetica" for both); paint background of screen preview light grey so as contrasts with whitespace and quiet zones EMF: prefix funcs with `emf_`; simplify string `halign` handling large: rename `large_int` -> `large_uint` CODE128/common: move `c128_hrt_cpy_iso8859_1()` to `hrt_cpy_iso8859_1()` and add `ZINT_WARN_HRT_TRUNCATED` warning (for future use) Various symbologies: replace `printf()` with `fputs()` (symbol->debug) QRCODE: better assert(), removing a NOLINT (2 left) CLI: add some more barcode synonyms for DBAR common: various fiddlings CMake: don't include png.c unless ZINT_USE_PNG (avoids clang warning)
2023-06-11 20:25:55 -04:00
fputs("Codewords:\n", stdout);
for (i = 0; i < rows; i++) {
for (j = 0; j < 8; j++) {
printf(" %2d", c_grid[i][j]);
}
EAN/UPC: add quiet zone indicators option (API `output_options` `EANUPC_GUARD_WHITESPACE`, CLI `--guardwhitespace`) (ticket #287) EAN-2/EAN-5: HRT now at top instead of at bottom for standalones, following BWIPP CLI: batch mode: don't close input if stdin EAN/UPC: fix excess 1X to right of add-ons Composites: fix excess whitespace; fix quiet zone calcs to allow for linear shifting CLI: use own (Wine) version of `CommandLineToArgvW()` to avoid loading "shell32.dll" Move "font.h" -> "raster_font.h" EPS/SVG: use new `out_putsf()` func to output floats, avoiding trailing zeroes & locale dependency EPS: simplify "TR" formula SVG: change font from "Helvetica, sans serif" to "OCR-B, monospace"; use single "<path>" instead of multiple "<rect>"s to draw boxes (reduces file size) Add `EMBED_VECTOR_FONT` to `output_options` (CLI `--embedfont`) to enable embedding of font in vector output - currently only for SVG output of EAN/UPC GUI: use "OCR-B" font for EAN/UPC and "Arimo" for all others (was "Helvetica" for both); paint background of screen preview light grey so as contrasts with whitespace and quiet zones EMF: prefix funcs with `emf_`; simplify string `halign` handling large: rename `large_int` -> `large_uint` CODE128/common: move `c128_hrt_cpy_iso8859_1()` to `hrt_cpy_iso8859_1()` and add `ZINT_WARN_HRT_TRUNCATED` warning (for future use) Various symbologies: replace `printf()` with `fputs()` (symbol->debug) QRCODE: better assert(), removing a NOLINT (2 left) CLI: add some more barcode synonyms for DBAR common: various fiddlings CMake: don't include png.c unless ZINT_USE_PNG (avoids clang warning)
2023-06-11 20:25:55 -04:00
fputc('\n', stdout);
}
}
#ifdef ZINT_TEST
if (symbol->debug & ZINT_DEBUG_TEST) {
debug_test_codeword_dump_int(symbol, (int *)c_grid, rows * 8);
}
#endif
/* Transfer data to symbol character array (w grid) */
for (i = 0; i < rows; i++) {
for (j = 0; j < 4; j++) {
w_grid[i][j] = (c_grid[i][2 * j] * 49) + c_grid[i][(2 * j) + 1];
}
}
for (i = 0; i < rows; i++) {
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
bp = 0;
bp = bin_append_posn(2, 2, pattern, bp); /* Start character "10" */
for (j = 0; j < 4; j++) {
if (i != (rows - 1)) {
if (c49_table4[i][j] == 'E') {
/* Even Parity */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
bp = bin_append_posn(c49_even_bitpattern[w_grid[i][j]], 16, pattern, bp);
} else {
/* Odd Parity */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
bp = bin_append_posn(c49_odd_bitpattern[w_grid[i][j]], 16, pattern, bp);
}
} else {
/* Last row uses all even parity */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
bp = bin_append_posn(c49_even_bitpattern[w_grid[i][j]], 16, pattern, bp);
}
}
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
bp = bin_append_posn(15, 4, pattern, bp); /* Stop character "1111" */
/* Expand into symbol */
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
for (j = 0; j < bp; j++) {
if (pattern[j] == '1') {
set_module(symbol, i, j);
}
}
}
symbol->rows = rows;
Performance improvements for linear encoding and raster output - use fixed-length string tables (mostly) instead of (char *) pointer ones (saves ~40K) - re-use C128Table for CODABLOCKF and CODE16K (required removal of Stop character and extra CODE16K-only entry) - use pointer to destination and copy (memcpy/strcpy(), bin_append_posn()) instead of concatenating (strcat()) (mostly) - replace last remaining bin_append()s with bin_append_posn(); bin_append() removed - add length arg to toupper() and expand() (avoids strlen()) - change is_sane() to use table-based flags (avoids an iteration) - rename lookup() to is_sane_lookup() and change to check and return posns and use in pointer to destination loops (avoids strcat()s) - remove special case PHARMA in expand() (dealt with in pharma()) - make #define SILVER/CALCIUM/TECHNETIUM/KRSET etc static strings - replace strchr() -> posn() - CODE128: populate destination once in checksum loop; re-use and export some more routines (c128_set_a/b/c(), c128_put_in_set()) for sharing; prefix defines (SHIFTA -> C128_SHIFTA etc) and existing exported routines - use factor XOR toggle trick in checksum calcs (avoids branch) - raster.c: fill out single 1-pixel row and copy using new draw_bar_line(), copy_bar_line() routines; similarly in buffer_plot compare previous line & copy if same (same technique as used to improve non-half-integer scaling, significant performance increase, (c) codemonkey82); also done for PNG (BMP/GIF/PCX/TIFF not done) - raster/vector/output.c: shorten "output_" prefix -> "out_"; sync vector to other raster changes to try to keep source files similar - 2of5.c: prefix "c25_" JAPANPOST: return error if input data truncated (backward incompatible) DAFT: max chars 50 -> 100 common.c: istwodigit() -> is_twodigit() common.c/emf.c/output.c: use some further stripf()s (MSVC6 float variations) library.c: new check_output_args() helper zint.h: add BARCODE_LAST marker and use in library.c QRCODE: remove a NOLINT (requires clang-tidy-13), one remaining CMake: separate no-optimize from ZINT_DEBUG into new ZINT_NOOPT option
2021-10-20 18:05:30 -04:00
symbol->width = bp;
if (symbol->output_options & COMPLIANT_HEIGHT) {
/* ANSI/AIM BC6-2000 Section 2.6 minimum 8X; use 10X as default
Formula 2 H = ((h + g)r + g)X = rows * row_height + (rows - 1) * separator as borders not included
in symbol->height (added on) */
const int separator = symbol->option_3 >= 1 && symbol->option_3 <= 4 ? symbol->option_3 : 1;
const float min_row_height = stripf((8.0f * rows + separator * (rows - 1)) / rows);
const float default_height = 10.0f * rows + separator * (rows - 1);
error_number = set_height(symbol, min_row_height, default_height, 0.0f, 0 /*no_errtxt*/);
} else {
(void) set_height(symbol, 0.0f, 10.0f * rows, 0.0f, 1 /*no_errtxt*/);
}
symbol->output_options |= BARCODE_BIND;
if (symbol->border_width == 0) { /* Allow override if non-zero */
symbol->border_width = 1; /* ANSI/AIM BC6-2000 Section 2.1 (note change from previous default 2) */
}
return error_number;
2016-05-22 16:52:29 -04:00
}
/* vim: set ts=4 sw=4 et : */