zint-barcode-generator/backend/reedsol.c

/** 
 
  This is a simple Reed-Solomon encoder
  (C) Cliff Hones 2004
 
    Redistribution and use in source and binary forms, with or without
    modification, are permitted provided that the following conditions
    are met:

    1. Redistributions of source code must retain the above copyright 
       notice, this list of conditions and the following disclaimer.  
    2. Redistributions in binary form must reproduce the above copyright
       notice, this list of conditions and the following disclaimer in the
       documentation and/or other materials provided with the distribution.  
    3. Neither the name of the project nor the names of its contributors
       may be used to endorse or promote products derived from this software
       without specific prior written permission. 

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
    ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
    ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
    FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
    OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
    OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
    SUCH DAMAGE. 
 */

// It is not written with high efficiency in mind, so is probably
// not suitable for real-time encoding.  The aim was to keep it
// simple, general and clear.
//
// <Some notes on the theory and implementation need to be added here>

// Usage:
// First call rs_init_gf(poly) to set up the Galois Field parameters.
// Then  call rs_init_code(size, index) to set the encoding size
// Then  call rs_encode(datasize, data, out) to encode the data.
//
// These can be called repeatedly as required - but note that
// rs_init_code must be called following any rs_init_gf call.
//
// If the parameters are fixed, some of the statics below can be
// replaced with constants in the obvious way, and additionally
// malloc/free can be avoided by using static arrays of a suitable
// size.

#include <stdio.h>		// only needed for debug (main)
#include <stdlib.h>		// only needed for malloc/free
#include "reedsol.h"
static int logmod; // 2**symsize - 1
static int rlen;

static int *logt = NULL, *alog = NULL, *rspoly = NULL;

// rs_init_gf(poly) initialises the parameters for the Galois Field.
// The symbol size is determined from the highest bit set in poly
// This implementation will support sizes up to 30 bits (though that
// will result in very large log/antilog tables) - bit sizes of
// 8 or 4 are typical
//
// The poly is the bit pattern representing the GF characteristic
// polynomial.  e.g. for ECC200 (8-bit symbols) the polynomial is
// a**8 + a**5 + a**3 + a**2 + 1, which translates to 0x12d.

void rs_init_gf(const int poly) {
    int m, b, p, v;

    // Find the top bit, and hence the symbol size
    for (b = 1, m = 0; b <= poly; b <<= 1)
        m++;
    b >>= 1;
    m--;

    // Calculate the log/alog tables
    logmod = (1 << m) - 1;
    logt = (int *) malloc(sizeof (int) * (logmod + 1));
    alog = (int *) malloc(sizeof (int) * logmod);

    for (p = 1, v = 0; v < logmod; v++) {
        alog[v] = p;
        logt[p] = v;
        p <<= 1;
        if (p & b)
            p ^= poly;
    }
}

// rs_init_code(nsym, index) initialises the Reed-Solomon encoder
// nsym is the number of symbols to be generated (to be appended
// to the input data).  index is usually 1 - it is the index of
// the constant in the first term (i) of the RS generator polynomial:
// (x + 2**i)*(x + 2**(i+1))*...   [nsym terms]
// For ECC200, index is 1.

void rs_init_code(const int nsym, int index) {
    int i, k;

    rspoly = (int *) malloc(sizeof (int) * (nsym + 1));

    rlen = nsym;

    rspoly[0] = 1;
    for (i = 1; i <= nsym; i++) {
        rspoly[i] = 1;
        for (k = i - 1; k > 0; k--) {
            if (rspoly[k])
                rspoly[k] = alog[(logt[rspoly[k]] + index) % logmod];
            rspoly[k] ^= rspoly[k - 1];
        }
        rspoly[0] = alog[(logt[rspoly[0]] + index) % logmod];
        index++;
    }
}

void rs_encode(const size_t len,const unsigned char *data, unsigned char *res) {
    int i, k, m;
    for (i = 0; i < rlen; i++)
        res[i] = 0;
    for (i = 0; i < len; i++) {
        m = res[rlen - 1] ^ data[i];
        for (k = rlen - 1; k > 0; k--) {
            if (m && rspoly[k])
                res[k] = (unsigned char) (res[k - 1] ^ alog[(logt[m] + logt[rspoly[k]]) % logmod]);
            else
                res[k] = res[k - 1];
        }
        if (m && rspoly[0])
            res[0] = (unsigned char) (alog[(logt[m] + logt[rspoly[0]]) % logmod]);
        else
            res[0] = 0;
    }
}

/* The same as above but for larger bitlengths - Aztec code compatible */
void rs_encode_long(const int len, const unsigned int *data, unsigned int *res) {
    int i, k, m;
    for (i = 0; i < rlen; i++)
        res[i] = 0;
    for (i = 0; i < len; i++) {
        m = res[rlen - 1] ^ data[i];
        for (k = rlen - 1; k > 0; k--) {
            if (m && rspoly[k])
                res[k] = res[k - 1] ^ alog[(logt[m] + logt[rspoly[k]]) % logmod];
            else
                res[k] = res[k - 1];
        }
        if (m && rspoly[0])
            res[0] = alog[(logt[m] + logt[rspoly[0]]) % logmod];
        else
            res[0] = 0;
    }
}

/* Free memory */
void rs_free(void) {
    free(logt);
    free(alog);
    free(rspoly);
    rspoly = NULL;
}